EPDM Brake Hose 7.5mm x 13mm
Free UK Delivery
Genuine EPDM Internal Cotton Braided Brake fluid hose
Suitable for 7 or 8mm fittings
Some 8mm fittings can be tight, lubricate fitting and place hose in hot water for a few minutes before fitting, secure in place with clamp.
Sold in 100mm lengths, 10 x 100mm lengths will give you 1 metre.
If you order 3 units you will receive a continuous 300mm length etc.
7.5mm ID x 13mm OD
EPDM (Ethylene Propylene, EPM)
EPM is a copolymer of ethylene and propylene. Ethylenepropylene-diene rubber (EPDM) is produced using a third monomer and is particularly useful when sealing phosphate-ester hydraulic fluids and in brake systems that use fluids having a glycol base.
Heat resistance: Up to 300°F (149°C) (max. 400°F (204°C) in water and/or steam).
Cold flexibility: Down to approximately –70°F (–57°C).
Hot water and steam up to 300°F (149°C) with special compounds up to 400°F (204°C)
Glycol based brake fluids up to 300°F (149°C)
Many organic and inorganic acids
Cleaning agents, soda and potassium alkalis
Phosphate-ester based hydraulic fluids (HFD-R)
Silicone oil and grease
Many polar solvents (alcohols, ketones, esters)
Ozone, aging and weather resistant.
Not compatible with:
Mineral oil products (oils, greases and fuels).
Write an online review and share your thoughts with other shoppers!